iFi audio - Zen DAC Signature V2

Το iFi audio - Zen DAC Signature V2 ειναι USB DAC και ενισχυτης ακουστικων. Εξοδοι: 1x pair RCA, 1x balanced Pentaconn. Εισοδος: USB 3.0

299.00€

Διαθεσιμότητα: 1-3 ημέρες

ΔΩΡΕΑΝ ΑΠΟΣΤΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

Το iFi audio Zen DAC Signature V2 ειναι USB DAC και ενισχυτης ακουστικων. Εξοδοι: 1x pair RCA, 1x  balanced Pentaconn. Εισοδος: USB 3.0

Εγγυηση Αντιπροσωπειας. Δυνατοτητα δοσεων.

Specifications

  • desktop USB DAC with built-in high-performance headphone amp
  • improves sound from your PC, laptop, digital music player, iPhone®, and/or Android™ phone
    • USB cable included (Type A to Type B)
  • compact design with sturdy metal chassis
  • four rubber feet with no-slip grip
  • 16-core XMOS processor/microcontroller programmed by iFi's development team for optimized sound and perfect cooperation with digital-to-analog converter chip

Digital-to-analog converter:

  • Burr-Brown "True Native" digital-to-analog converter chip for high-quality sound
  • supported audio files: PCM and DXD up to 32-bit/384kHz; DSD up to DSD256 ( up to 11.2 MHz)
  • offers full decoding for MQA (Master Quality Authenticated) audio files
  • GMT (Global Master Timing) femto-precision clock and intelligent memory buffer to eliminate jitter

Balanced headphone amplifier:

  • two front-panel headphone outputs:
    • one unbalanced 1/4" headphone output (3.5mm mini to 1/4" adapter included)
    • one balanced Pentaconn 4.4mm output
  • low noise floor for clear audio reproduction
  • output power (4.4mm):
    • 330mW @ 32 ohms
    • 6.6V @ 600 ohms
  • output power (1/4"):
    • 230mW @ 32 ohms
    • 3.3V @ 600 ohms
  • compatible with headphones from 16-600 ohms
  • THD+N: 0.005
  • signal-to-noise ratio: 113 dB

Front-panel controls:

  • TrueBass sound control processing for boosting bass
  • PowerMatch switchable gain
  • high-precision volume control dial

Back-panel DAC/preamp connections and controls:

  • Type B USB input for connecting PC, smartphone, and other mobile devices
  • one balanced 4.4mm output for connecting a compatible powered speaker or amp
  • Note: do NOT connect balanced headphones to this output — the full signal could damage your headphones and/or hearing.
  • line direct/preamp selection switch (fixed or variable)
  • stereo unbalanced RCA preamp output with selectable fixed/variable level (RCA cables included)

Line output section:

  • RCA output power: 2.1V (fixed); 1V-3.3V (variable)
  • rear 4.4mm Pentaconn output power: 4.2V (fixed); 2V-6.2V (variable)
  • THD+N: 0.0015%
  • signal-to-noise ratio: 116 dB

General info and specs:

  • draws power from your laptop or PC when connected via USB
  • 5-volt DC power input
    • power cable not included
  • color-coded LED indicator denotes MQA status:
    • blue indicates an MQA Studio file is playing
    • green indicates the MQA file is being decoded by the Zen DAC V2
  • headphone output impedance: < 1 ohm (balanced and unbalanced)
  • dimensions (measured by Crutchfield): 6-1/4"W x 1-3/4"H x 6-9/16"D
  • weight: 1.13 lbs

What's in the box:

  • D/A converter
  • 20" USB cable (Type A USB 3.0 on one end and Type B USB 3.0 on other end)
  • 20" Audio cable (stereo RCA plugs on each end)
  • 3.5mm-to-1/4" adapter
  • Quick Start Guide
  • Warranty card

Σχετιζόμενα Προϊόντα

Σεβόμαστε την ιδιωτικότητά σας
Η ιστοσελίδα χρησιμοποιεί cookies για την καλύτερη εμπειρία πλοήγησης των χρηστών.
Τα απαραίτητα για τη λειτουργία του ιστοτόπου cookies είναι πάντα ενεργά, ενώ μπορείτε να αλλάξετε τις ρυθμίσεις για τα cookies που αφορούν στη συλλογή στατιστικών ή marketing.