Το Vestlyd Type V15C ειναι ζευγος ηχειων βασεως 2 δρομων με ομοκεντρικη (coaxial) μοναδα που υλοποιειται με 1x 15" woofer και 1x 1" compression driver-tweeter TI dome. Ευαισθησια 95db, προσληψη ισχυος 10-500 watts.

Οι εικονιζεμενες βασεις δεν περιλαμβανονται στην τιμη. Κοστιζουν 229€.

Εγγυηση Αντιπροσωπειας. Δυνατοτητα δοσεων.

When only the best will do! V15C delivers insane dynamics, soundstage, and heavy bass, even in huge rooms. With its 15” woofer and 95 dB sensitivity, V15C is as much a physical experience as it is a musical one. You can finally feel the impact when those orcs clash into the staunch line of heavily armored elves, or the slap of the bass drum in your favorite tracks. No subwoofer needed!

Features

• 95 dB sensitivity and incredibly low distortion
• Coaxial design for smooth frequency response
• Custom drivers made to go LOUD
• Even spread of sound with a wide sweet spot
• Cabinet built like a tank 

Coaxial Design
The design of Vestlyd is heavily inspired by vintage speakers from the 70s, but the special coaxial construction is more than a fancy design; it has audible advantages too. In this design, the compression tweeter is mounted directly in the back of the motor system of the woofer, solving the crucial time alignment issue between the two drivers. At the same time, the woofer has a horn-like effect on the tweeter, optimizing SPL – an added benefit of the design! We call this special speaker type: Power Monitor.

Wide Sweet Spot
Most coaxial loudspeakers are tuned to be very direct in their sound, need to be toed in and only really sound good in the absolute sweet spot; especially at high frequencies, they can be very beamy. Vestlyd, however, is designed to have very wide dispersion, with a sweet spot that is much wider than what you'd normally get in speakers like these. With this special coaxial design, you get the best from both worlds: perfect time alignment and an even spread of the sound, even at high frequencies. Consequently, Vestlyd speakers do not need to be toed in!

Made to be LOUD
Make no mistake: Vestlyd go LOUD. A pair of these speakers can deliver a sound pressure level in excess of 130 dB, effectively giving you concert levels of sound with low distortion. Be aware that listening at these levels can be dangerous for your hearing! We applied advanced FEA (Finite Element Analysis) simulations and measurement equipment to optimize every element – from the voice coil to the cone for high-power performance.

Technical Details

• The design of Vestlyd is heavily inspired by vintage speakers from the 70s, with added inspiration from classic power speakers. However, compared to conventional power speakers, a Vestlyd speaker has far more detail, musicality, and control, bringing it closer to classical studio monitors. We did not want to make it quite as analytical, though, so Vestlyd presents a far more forgiving and entertaining listening experience than pure studio monitors, which can often sound too clean in a normal living space. This means that you essentially get the best of both worlds.
• We call this special speaker type: Power Monitor. We identified three key areas to make these speakers a success: even dispersion, high SPL and low distortion.

Specifications

• Freq. response [Hz -6dB] 36-22.000 Hz
• Impedance [Ohm] 4 ohm
• Sensitivity [dB @2,83V] 95
• Crossover Freq. [Hz] 1100 Hz
• Woofer 15” paper cone
• Woofer motor system Ferrite
• Compression driver 1” Laminated TI dome w/high power neodynium motor
• Max. rec. amplifier power 500 watts
• Terminals Banana/screw + Neutrik Speakon
• Cabinet
  • MDF (front baffle 31 mm), finish in synthetic leather
  • Black fabric frame for front included
  • 2-way coaxial bass reflex construction with 2 x bass port (front)
• Dimensions (w/ rubber feet) H742 x W468 x D417 mm
• Weight 34 kg (per piece)